RV Mattress Buying Guide for the 2025 Jayco Jay Flight • 267BHS
Quick Answers
Known Mattress Sizes for the Jay Flight 267BHS
2025 Jayco Jay Flight 267BHS floorplan. Main bedroom is at the front. Double-over-double bunk set is at the rear. Tri-fold sofa and theater seating are not replacement mattress platforms.
| Location | Platform Size | Available Options |
|---|---|---|
| Main Bedroom | 60″ × 75″ Custom size required | MA 12″ Pocket Coil — Recommended |
| PA 15″ Nano-on-Coil — Premium upgrade | ||
| CUB 10″ HD Foam — Confirm fit | ||
| PUP 6″ Ultra-Slim — Confirm fit | ||
| Top Bunk | 48″ × 75″ RV ¾ standard | PUP 6″ Ultra-Slim — Best where overhead space is limited |
| CUB 10″ HD Foam — Where available height allows | ||
| MA 12″ Pocket Coil — Where available height allows | ||
| Bottom Bunk | 48″ × 75″ RV ¾ standard | PUP 6″ Ultra-Slim — Best where overhead space is limited |
| CUB 10″ HD Foam — Where available height allows | ||
| MA 12″ Pocket Coil — Where available height allows |
What to Confirm Before Ordering
Order by measurements, not by mattress name
RV mattress names are not always consistent across manufacturers. “RV queen,” “short queen,” “bunk,” and “RV king” can refer to different dimensions, so order by the measured width × length before placing an order.
Measure the platform, not the mattress
Old RV foam mattresses compress and shrink. Measure the platform surface directly with a tape measure, not the mattress lying on it.
Account for any modifications
Pre-owned units may have modified platforms. Measure directly — don’t rely on factory specs, previous owner notes, or floorplan assumptions.
Check corner shape on every mattress platform
Look at all four corners of each mattress platform. Bottom bunks near ladders, walls, cabinets, and access points may have notched or angled corners that affect how a replacement mattress will sit on the platform. Ensure all four corners are square, as radius, notched, and angled cuts are not available at this time.
Confirm moving parts and closed-position space
If the mattress platform lifts, folds, slides, or stores away, check the space in both the sleeping and closed positions. A thicker replacement mattress may interfere with slide-outs, cabinets, doors, Murphy beds, lift-up storage platforms, or folding mechanisms.
Check bunk side rails
For bunk platforms with raised side rails, measure the usable depth inside the rail to ensure the replacement mattress will not sit too tall or reduce safe headroom.
From Factory Fit to Sleeping Cool — Understanding Your Options
The 2025 Jayco Jay Flight 267BHS is a family travel trailer built around sleeping capacity. The main bedroom platform measures 60″ × 75″ — slightly longer than the 60″ × 74″ standard RV short queen, which means a direct off-the-shelf replacement is unlikely to fit without a custom order. The double-over-double bunk set adds two 48″ × 75″ platforms on each side, a size that matches the RV ¾ standard and can be filled with an in-stock variant.
Factory RV mattresses are engineered for a specific set of tradeoffs: light weight, precise platform sizing, and low upfront cost. For owners focused on towing payload or occasional-use camping, they serve their purpose. Where they fall short is in extended or warm-weather use. Travel trailer interiors heat up faster than stick-built bedrooms and retain warmth longer — conditions that amplify the comfort gap in a foam-only mattress. Pocket coil systems and conductive cooling memory foam layers are specifically designed to address these conditions.
If you travel with this trailer regularly, sleep four or more people across the bunk set, or camp in warm climates, a cooling replacement mattress is worth the investment. Measure each platform directly before ordering — the 60″ × 75″ main bed in particular will need a custom size.
What PolarBed Does Differently for RV Sleep
PolarBed mattresses are built around the conditions that make RV sleeping difficult: non-standard platform sizes, bunk rail constraints, and trailer interiors that heat up faster and retain warmth longer than a home bedroom. Every product line is available in custom sizes for platforms that do not match any retail standard.
- PUP 6″ — Ultra-slim cooling foam designed for tight overhead space where a thicker mattress will not fit. The practical first choice when usable height above the platform is the limiting factor.
- CUB 10″ — HD foam with Conductive Cooling Memory Foam. Fuller support where available height allows, without the weight or cost of a coil system.
- MA 12″ — Pocket coil pillow top with Cool Gel Memory Foam. Coil layers allow airflow through the mattress core, which is especially relevant in warm trailer conditions. Recommended for the main bedroom upgrade.
- PA 15″ — 2,400 Nano-on-Coil luxury pillow top. Premium main bedroom upgrade where headroom allows. Not available for bunk or twin platforms.
- Custom sizing — All four product lines support custom-cut orders. Order by your confirmed platform measurements, not by the mattress name printed on your factory foam.
Sleep Location Mattress Options
Main Bedroom Options — 60″ × 75″ Custom Size
The 267BHS main bedroom platform measures 60″ × 75″ — one inch longer than the 60″ × 74″ standard RV short queen. Order by your confirmed measurements: 60″ × 75″.
Bunk Mattresses — 48″ × 75″ (RV ¾ Standard)
The 267BHS double-over-double bunk set has two platforms per side, each measuring 48″ × 75″. This matches the RV ¾ standard size. Overhead space above each bunk varies by position — measure the usable height above each platform before selecting a thicker mattress.
Choosing the Right PolarBed Line
| Line | Thickness | Cooling Technology | Best For |
|---|---|---|---|
| PUP | 6″ | Cooling Memory Foam | Tight overhead space, bunk rails, and low-profile RV sleep areas |
| CUB | 10″ | Conductive Cooling Memory Foam | Bunks where available height allows a fuller mattress; double-size platforms; some main beds |
| MA | 12″ | Cool Gel Memory Foam + Pocket Coil | Recommended main bedroom upgrade; bunks only where available height allows |
| PA | 15″ | Cooling Pillow Top + 2,400 Nano-on-Coil | Premium main bedroom upgrade where mattress height is not restricted |
FAQs About the Jay Flight 267BHS Mattress Sizes
What size mattress does the main bedroom in the 267BHS use?
Can I use a standard 60″ × 74″ RV short queen mattress?
What size are the bunk mattresses in the 267BHS?
How many replacement mattresses does the 267BHS need?
Which PolarBed line is recommended for the main bedroom?
Which PolarBed line is recommended for the bunks?
Do I need to measure even if the floorplan shows the dimensions?
Location-by-Location Fitment Details
- This platform is one inch longer than the 60″ × 74″ standard RV short queen. A custom-size order is required.
- Measure your specific unit before ordering — production changes and owner modifications can affect fit.
- MA 12″ Pocket Coil is the recommended main bedroom upgrade.
- PA 15″ Nano-on-Coil is the premium step-up where mattress height is not restricted.
- All four PolarBed lines support custom-cut orders for this platform.
- 48″ × 75″ matches the RV ¾ standard size.
- PUP 6″ is the practical first choice where overhead space above the bunk is the primary concern.
- CUB 10″ is available where usable height above the platform allows a fuller mattress.
- MA 12″ is available for bunk platforms with adequate overhead space.
- Measure the usable height above each bunk platform and the depth inside any side rails before ordering.